How to Reset Dodge Charger Computer
The Dodge Charger is a popular muscle car that has been in production since the 1960s. It is known for its powerful engine, sleek design, and impressive performance. However, like any other car, the Dodge Charger can experience computer-related issues that can affect its performance. In this article, we will discuss how to reset the Dodge Charger computer to fix these issues.
Disconnect the Battery Cables
The most common way to reset the Dodge Charger computer is by disconnecting the battery cables from the battery terminals [1]. Here’s how to do it:
Step 1: Turn off the ignition and remove the key from the car.
Step 2: Open the hood and locate the battery, usually located on the right side.
Step 3: Use a wrench or pliers to loosen the negative battery cable clamp.
Step 4: Remove the negative battery cable from the battery terminal.
Step 5: Repeat step 3 and 4 for the positive battery cable.
Step 6: Wait for at least 15 minutes before reconnecting the battery cables.
Step 7: Reconnect the positive battery cable first, then the negative battery cable.
Resetting the Computer Using Fuses
Another way to reset the Dodge Charger computer is by removing specific fuses from the fuse box [2]. Here’s how to do it:
Step 1: Open the hood of the vehicle and open the covered fuse box on the passenger side of the vehicle.
Step 2: Remove the following fuses and set them aside: 11, 14, and 16. These are labeled on the underside of the fuse box cover in a mirrored-layout fashion. Fuse 16 is a Dark-Blue 15amp fuse found on the far right of the box.
Step 3: Wait for at least 15 minutes before reinstalling the fuses.
Step 4: Reinstall the fuses in their original locations.
Resetting the Computer Using the Gas Pedal
Another method to reset the Dodge Charger computer is by using the gas pedal [3]. Here’s how to do it:
Step 1: Turn off the ignition and remove the key from the car.
Step 2: Press the gas pedal all the way down slowly and all the way back up slowly. The process of pressing the pedal down and back up should take about 10 seconds.
Step 3: Press the ignition switch once to put it back to off.
Step 4: Start the car normally.
Conclusion
Resetting the Dodge Charger computer is a simple process that can be done by anyone. It is essential to reset the computer when experiencing computer-related issues to improve the car’s performance. The three methods discussed in this article are disconnecting the battery cables, removing specific fuses from the fuse box, and using the gas pedal. Try these methods to reset your Dodge Charger computer and enjoy a smooth ride.
